CM SK Truck Bed      CM SS Truck Bed      CM TM Truck Bed

CM SK Truck Bed
Steel skirted utility truck body with internal stake pockets and full length sides

Standard Features

Available Sizes
8'-6" length x 86"
9'-0" length x 92"
11'-0" length x 92"

Design Features & Hardware
All steel frame construction
4" steel channel frame rails
3" steel channel cross members
1/8" steel tread plate deck
Steel tubing headache with full view side gussets, round "easy view" window grill
Side rub rails with standard size stake pockets
Two - fuel access knock-outs on driver side
Removable 4" tall side rails
Two lockable recessed tool boxes, one per side located in front of wheel well
Recessed gooseneck ball mounting box with easy access cover and two safety chain hook loops
Rear lower combination step-bumper with anti-skid aluminum tread plate on step area
Full access receiver mount
Full length rear skirt with mounting hole for trailer light plug, recessed stop, tail, turn & backup lights
Spare tire crank access knockout
Full length side skirt with rolled fenders and complete low step assistance with anti-skid aluminum tread plate
Front and rear bed corners tapered for safety
Epoxy primer with dual applications of topcoat urethane - #GMA88:20T Black

Lights
Lighted recessed tag compartment
All lights recessed
Two recessed tail and turn lights mounted in headache rack
One recessed cargo lights mounted in headache rack
DOT required lighting (tag & marker tape)

CM Trailers reserves the right to make any change in paint, design, or construction as necessary for engineering. All visual representation, specification, and dimensions are based on the latest product information available at the time of publication. Some of the equipment shown or described is available at extra cost. At no time will any of the material or information contained in this publication have any justifications for resolving disputes. All axle ratings will be listed as per FMVSS 120, Section 5.1 states, the maximum load rating of the tires and rims fitted to an axle shall not be less than the GAWR specified on the certification label.

SS TRUCK BED

CM SS Truck Bed
Steel utility truck body with internal stake pockets and smooth sides

Standard Features

Available Sizes
8'-6" length
9'-0" length
11'-0" length

Design Features & Hardware
All steel frame construction
4" steel channel frame rails
3" steel channel cross members
1/8" steel tread plate deck
Steel tubing headache with full view side gussets, round "easy view" window grill
Smooth side rails with internal stake pockets
Two - fuel access knock-outs on driver side
Removable 4" tall side rails
5" steel channel frame drop mounting step and rear hitch with ball mount and two safety chain hook loops
Recessed gooseneck ball mounting box with easy access cover and two safety chain hook loops
Solid rear skirt with mounting hole for trailer light plug
Spare tire crank access knockout
Epoxy primer with dual applications of topcoat urethane - #GMA88:20T Black

Lights
Lighted recessed tag compartment
All lights recessed
Tail light visibility panels with protector grill
Two recessed tail and turn lights mounted in headache rack
One recessed cargo light center mounted in headache rack
DOT required lighting (tag & marker tape)

TM TRUCK BED

Photo may contain optional equipment.

TM MODEL: Standard Features

Available Sizes
8'-6" length
9'-0" length
11'-0" length

Design Features & Hardware
All steel frame construction
4" steel channel frame rails
3" steel channel cross members
1/8" steel tread plate deck
Steel tubing headache rack with round "easy view" window grill
Fuel access knock-out(s) on driver side
Two lockable recessed tool boxes per side (with the option of an additional box behind wheel well)
Recessed gooseneck ball mounting box with easy access removable cover and two safety chain loops
Rear bumper with aluminum tread plate trim
Full access receiver mount
Full length rear skirt
Spare tire crank knockout
Full length side skirt with rolled fenders and aluminum tread plate trim
Rear bed corners tapered for turning radius
Premium TGIC Polyester powdercoat: black

Lights
Two recessed tail, brake and back up lights mounted in headache rack
Stop, turn, tail, back up and tag lights in skirt
DOT required lighting (clearance & marker lights)
All lighting must be wired to meet all DOT requirements as originally intended by the vehicle manufacturer

Fender Wells
Due to various chassis lengths and configurations, specific measurements may determine the fender weld placement on skirted beds (i.e. 2003 Dodge is 58" cab to axle measurement, whereas Ford and Chevy are 56" on bed off models)

CM Truck Beds reserves the right to make any change in paint, design, or construction as necessary for engineering. All visual representation, specification, and dimensions are based on the latest product information available at the time of publication. Some of the equipment shown or described is available at extra cost. At no time will any of the material or information contained in this publication have any justifications for resolving disputes.